VISHAL 366
Tractor Driven Combine Harvesters
Model: VISHAL 366
Category: Tractor Driven Combine
Type: Straw Walker
Cutter Bar: 12 Feet
No. of Straw Walkers: 6 (Six)
Tractor Required: 50 HP+
Harvesting: Multicrop
Steering: As Per Tractor
VISHAL TDC is tractor driven combine harvester that harvests grain crops in three separate operations comprising harvesting, reaping, threshing and winnowing into a single process. Among the crops harvested with this combine harvester are wheat, oats, rye, barley, soybean, sunflower, grame and pulses. The waste straw left behind on the field is the remaining dried stems and leaves of the crop with limited nutrients which is either chopped and spread on the field or baled for feed and bedding for livestock. VISHAL Combine Harvesters are one of the most economically important labour and time saving harvesting machines, significantly reducing the fraction of the population that must be engaged in agriculture.
Features and Highlights:
|
|
MANUFACTURER | MANKU Agro Tech Private Limited. | |||
Address of Manufacturer | Sehajpura Road, Samana - 147101, Distt. Patiala, Punjab. INDIA | |||
MAKE | VISHAL | |||
Model | 366 - TDC | |||
Type | Tractor Driven Combine Harvester | |||
THRESHING DRUM | FOR WHEAT | FOR PADDY | ||
Type | Rasp Bar | Peg Tooth | ||
Width (mm) | 1145 | 1145 | ||
Outside Dia (mm) | 605 | 600 | ||
STRAW WALKER | ||||
No. of Straw Walker | Five | |||
Type | Closed Rack Type. Serrated side edges with 6 steps on each Straw Walker. | |||
Size of each Straw Walker | ||||
Length (mm) | 3560 | |||
Width (mm) | 215 | |||
Area (M2) | 0.785 | |||
Effective separating area of straw walker (M2) | 0.682 | |||
Lift/throw (mm) | 75/75 | |||
Oscillation per minute corresponding to 1750 RPM of Engine | 153 | |||
GRAIN TANK | ||||
Location | On top of Combine, Behind Tractor. | |||
CONCAVE | FOR WHEAT | FOR PADDY | ||
Overall Width of Concave (mm) | 1160 | 1160 | ||
Effective Width (mm) | 1125 | 1120 | ||
Type of concave | Open grate wire mesh | Open flat bars with pegs in three rows. | ||
No. of Bars | 12 axial flat with4 M.S Rod of 12 mm dia &98 M.S wire of 4 mm dia are passing. | 07 axial M.S flat interconnected with one another by small pieces of metallic rod in which only first three having pegs. | ||
No. of Pegs per bars | - | 15 & 16 pegs each in alternate three row. | ||
CLEANING SIEVES | ||||
TOP Sieve | ||||
No of sieve | Two | |||
Type | Open lip frog mouth type | |||
Overall size of sieve | FRONT | REAR | ||
Length (mm) | 1400 | 530 | ||
Width (mm) | 1085 | 1085 | ||
Effective cleaning area (m2) | 1.366 | 0.468 | ||
Area of extension (m2) | NIL | NIL | ||
BOTTOM SIEVE | ||||
No of Sieve | One | |||
Type | Open Lip Frog Mouth Type | |||
Length (mm) | 1410 | |||
Width (mm) | 1085 | |||
Effective Cleaning Area (m2) | 1.394 | |||
CUTTER BAR ASSEMBLY | ||||
Working width with shoes (mm) | 3696 | |||
Effective cutter bar width (mm) | 3660 | |||
No. & Spacing of knife guards | 50 (25 Pairs) | |||
No. & Type of knife blades | 50, Serrated | |||
Details of knife drive | End of Cutter Bar is connected with a lever to the Pittman shaft and other end of pitman shaft is connected to eccentric cam arm which is connected to driving shaft. | |||
Knife Safety Arrangements | Knife Guard Provided | |||
Knife stroke(mm) | 80 | |||
Stroke per minute | 874 | |||
Knife speed corresponding to 1750 rpm of engine (m/sec.) | 1.165 | |||
REEL ASSEMBLY | ||||
Type | Tyne Bar Pick Up | |||
Number of Tyne bars | Six | |||
Size of Tyne bars (mm) | Dia - 27.0 Length - 3550 | |||
Types of Tyne bars | Hollow metallic pipe with holes for fitting spring Tynes. | |||
Dia of Reel (mm) | 890.0 | |||
Width of Reel (mm) | 3600 | |||
Range of speed corresponding to 1750 RPM of Engine (RPM) | Maximum: 47 Minimum: 32 | |||
Arrangements for speed variation | Mechanical,Stepless V – Pulley with mechanical variator. | |||
Number of tynes on each bar and their spacing | 28 (14 pairs) | |||
OVERALL DIMESIONS | ||||
Length (mm) | 7595 | |||
Width (mm) | 4345 | |||
Height | 3464 |
Due to our policy of continues R&D in Product Improvement and Development the Product Design, Color and/or Technical Specifications may change without any prior notice. Please confirm the Latest Product Specifications by mailing us at vishalcombine@manku.co.in